written by: DaveTheHat
Hi david - no, I wasn't aware that sampler 4 is only available from the percussion keys, but now I am! Thanks for clearing that upVia the advanced controls and the browser I can change the soundfonts associated with samplers 1 and 3. However, samplers 2 and 4 remain resolutely silent, even when I've loaded soundfonts. I've discovered the wrinkle about bypassing the Audio FX - as far as I can see I've set up sampler 2 in exactly the same was as sampler 1. Help!
Thx David
Hi, David
On the ALPHA, SAMPLER 2 is connected to the Breath pipe... try blowing and playing with the keys...
keyman
Ah, that would explain it. Thanks! What about sampler 4?
Now to work out how to _disconnect_ samplers from the breath controller.
Yea, I'd be glad to know how to disconnect and connect the breath controller to the samplers and audio units, I tried to work it out by myself, but belcanto isn't really intuitive for me for some reason.
What about sampler 4?
Even with the breath controller I can't get a squeak from sampler 4. No doubt there's a way of disconnecting the BC from the sampler via BelCanto. I've not played about with Stage yet, but that's clearly the next step.
I'm fairly certain that, whatever your issue is with S4, it isn't a breath issue.
Are you running Standard Tau setup? and no sound from Sampler 4??
Belcanto is one of the items that makes this instruments so unique and ultimately so configurable and customizable.
Thru STAGE you can "see" what's inside every setup, besides getting the widgets to control parameters... start using it ASAP
Stefan put up new tabs to use (they are for the PICO, would need some adjusting for use with the ALPHA or TAU).
keyman
Hi DaveTheHat,
Hmm, I can't think why you wouldn't be getting any sound from Sampler 4. Are you aware that you can only play Sampler 4's sounds from the percussion keys or the arranger? Perhaps you're choosing MIDI out 2 thinking its Sampler 4. If you take a look at page 8 of the Tau Quick Reference Guide you'll see that the key marked 16 on the Keygroup Mode Key Layout diagram is actually MIDI out 2. Its kind of located where you would assume Sampler 4 to be.
Here is a bit of Belcanto to disconnect Sampler 2's volume from breath...
"gain 3 volume input un connect"
"gain 3 hey"
"volume to 1 set"
And just in case - here is how to reconnect it...
"ranger agent 2 output to gain 3 volume input connect"
That script should work for Alpha as well as Tau.
Cheers,
Dave
@davidk
Once again you make it sound sooo simple...!
(thanks for this one...breath controller re /connect;)
keyman
Hi david - no, I wasn't aware that sampler 4 is only available from the percussion keys, but now I am! Thanks for clearing that up
Please log in to join the discussions
UK
