Forum

For those of you playing the harp to a MIDI instrument, it's fairly simple to hook up a MIDI out connection.

Basically, you can modify the setup created in the tutorials. First, delete the wire from one of the Scalers. Add a MIDI Converter and a MIDI Output agent to t0he setup. Then, connect the Scaler to the MIDI Converter and the MIDI Converter to the MIDI Output.

Then, click on the MIDI Output with the Edit tool. Select the MIDI Port you want to use from the list.

Now, the notes you play on the harp pass right thru to your MIDI instrument.

I've not been able to figure out how to add various parameters (bend and mod wheel) yet. Ideas?

Randy

Right. I saw that list. I tried wiring the Scaler's Roll and Yaw to param 5 and 1 (I think), but that had no effect.

Should I have wired the keyboard to MIDI Converter?

Randy

No, I didn't set up MIDI Routing. So, to understand - I would use MIDI Router first, then do the wiring in Workbench? Makes sense if that's the case. (BTW: I would not have thought it necessary to use another part of EigenD when working in Workbench. Considered making MIDI Routing integrated into Workbench workflow?)

Randy