Forum

Hello!

I ran into the same problem. I wanted to try out the fingerer, but I don't have workbench, so I built a script to create a setup with the fingerer for the clarinet. I based it on the Pico MIDI from scratch setup, and a setup found on the other fingerer thread, here.

Starting from the blank setup, first you have to set up the pico manager with the Commander:

empty join

pico manager create

When that's done, you can do the other stuff:

	empty join

	

	fingerer create

	scaler create

	shaper create

	clarinet oscillator create

	summer create

	audio create

		

	keyboard pico 1 breath output to fingerer 1 breath input connect

	keyboard pico 1 key output to fingerer 1 key input connect

	keyboard pico 1 pressure output to fingerer 1 pressure input connect

	keyboard pico 1 roll output to fingerer 1 roll input connect

	keyboard pico 1 yaw output to fingerer 1 yaw input connect



	fingerer 1 roll output to scaler 1 roll input connect

	fingerer 1 yaw output to scaler 1 yaw input connect

	fingerer 1 key output to scaler 1 key input connect

	fingerer 1 modifier output to scaler 1 modifier input connect

	fingerer 1 pressure output to scaler 1 pressure input connect



	scaler 1 global pitch bend input to clarinet oscillator 1 pitch time input connect

	scaler 1 pressure output to shaper 1 input connect

	scaler 1 frequency output to clarinet oscillator 1 frequency input connect

	scaler 1 frequency output to clarinet oscillator 1 minimum frequency connect

	

	shaper 1 output to clarinet oscillator 1 pressure input connect



	clarinet oscillator 1 output to summer 1 audio input 1 connect

	summer 1 audio output 1 to audio 1 audio input 1 connect

	summer 1 audio output 1 to audio 1 audio input 2 connect



	fingerer 1 hey

	fingering to tin whistle set

You can copy several lines into the commander, and then run them, it takes a while but it reads them all.

I don't think it's perfect, but it works for me. You might have to configure the audio settings for your audio device.
Try it out!